Handheld tools
have always been present in the industries. Without them, industries cannot
perform their daily tasks properly and fast. The handheld tools are necessary
for smooth and precise operation of every industry. The heavy tools and
machines cannot be taken to every part of the industry, and it is also not
possible to take every heavy metal part from every side of the industry to the
heavy fixed tools. For that purpose, handheld and smaller tools are used in
industries.
Let us take look
on these small tools used in various industries-
Welding sets- In every industry, metal parts do suffer general wear and tear and
break down. In order to restore the work, these broken parts must be restored.
This task is done with the help of welding sets. The welding sets produce very
high amount of current and heat, which melts the metal, and then that metal is
inserted between the joints of two metal parts making them a single piece. This
joint is so strong that it can again withstand any type of impact during the
various operations.
Surface
grinders- The surface grinders are used for giving
the metal surface a mirror finish. A good surface finish and smooth texture
ensure that the product is of good quality. For this purpose, the surface
grinders are used to polish and grind the uppermost layer of the metal to make
it even and smooth surface with a mirror finish.
Drill
machines- The drill machines are used to drill
holes in any hard metal surface. Although holes can be made manually, but manual
holes have not that much accuracy. These holes are used for placing fixtures
and screws. The drill bits of the drilling machines are made up of heavy duty
carbon steel and are coated with a layer of titanium dioxide, which gives them
extra strength.
Wrenches- In every industry, tightening and loosening of bolts and fasteners
is done on regular basis. For this purpose, wrenches are used. Wrenches are
classified in to two types basically. One is impact wrench and other is torque
wrench. Both the wrenches are used for different types of works. They make the
task of tightening and loosening very fast and accurate.
Spring
balancer- One main problem with handheld tools is
that they keep the hands of a worker occupied, which makes them feel tired. For
this purpose, spring balancer or tools balancers are used. The main use
of spring balancer is to hold the tools at the work station. Whenever the
worker needs a tool, he can pull it down from the spring balancer, and then
after the task is completed, the tools is automatically pulled up back keeping
the workstation safe and clear. The tools balancers come in variety of size and
capacities. You can choose the one according to your requirements. http://www.powermaster.in/en/products/spring-balancers.asp
0 comments:
Post a Comment